Figura 7. Influencia del modelo de turbulencia. Qmodelo=27.95l/s.

Numerical Modeling of Flush Flow in a Rapid Step Applying Computational Fluid Dynamics (CFD) Using Flow-3D.

레브 폴리텍. (Quito) [온라인]. 2018, vol.41, n.2, pp.53-64. ISSN 2477-8990.

이 프로젝트의 주요 목표는 FLOW-3D를 사용하여 계단식 여수로에서 스키밍 흐름의 수치 모델링을 개발하는 것입니다. 이러한 구조의 설계는 물리적 모델링에서 얻은 경험적 표현과 CFD 코드를 지원하는 계단식 여수로를 통한 흐름의 수치 모델링에서 보완 연구를 기반으로 합니다. 수치 모델은 균일한 영역의 유속과 계단 여수로의 마찰 계수를 추정하는 데 사용됩니다(ϴ = 45º, Hd=4.61m). 흐름에 대한 자동 통기의 표현은 복잡하므로 프로그램은 공기 연행 모델을 사용하여 특정 제한이 있는 솔루션에 근접합니다.

The main objective of this project is to develop the numerical modeling of the skimming flow in a stepped spillway using FLOW-3D. The design of these structures is based on the use of empirical expressions obtained from physical modeling and complementary studies in the numerical modeling of flow over the stepped spillway with support of CFD code. The numerical model is used to estimate the flow velocity in the uniform region and the friction coefficient of the stepped spillway (ϴ = 45º, Hd=4.61m). The representation of auto aeration a flow is complex, so the program approximates the solution with certain limitations, using an air entrainment model; drift flux model and turbulence model k-ԑ RNG. The results obtained with numerical modeling and physical modeling at the beginning of natural auto aeration of flow and depth of the biphasic flow in the uniform region presents deviations above to 10% perhaps the flow is highly turbulent.

Keywords : Stepped spillway; skimming flow; air entrainment; drift flux; numerical modeling; FLOW-3D.

Keywords : 계단식 여수로; 스키밍 흐름; 공기 연행; 드리프트 플럭스; 수치 모델링; 흐름-3D.· 

스페인어로 된 초록 · 스페인어 로 된 텍스트 · 스페인어로 된 텍스트( pdf ) 

Figure 1. Grazing flow over a rapid step.
Figure 1. Grazing flow over a rapid step.
Figura 2. Principales regiones existentes en un flujo rasante.
Figura 2. Principales regiones existentes en un flujo rasante.
Figure 3. Dimensions of the El Batán stepped rapid.
Figure 3. Dimensions of the El Batán stepped rapid.
Figure 4. 3D physical model of the El Batán stepped rapid
Figure 4. 3D physical model of the El Batán stepped rapid
Figura 7. Influencia del modelo de turbulencia. Qmodelo=27.95l/s.
Figura 7. Influencia del modelo de turbulencia. Qmodelo=27.95l/s.

REFERENCIAS

ARAGUA. (2013). “Modelación numérica y experimental de flujos aire-agua
en caídas en colectores.”, Laboratório Nacional de Engenharia Civil, I.
P. Av do Brasil 101 • 1700-066 Lisboa.
Bombardelli, F.A., Meireles, I. and Matos, J., (2010), “Laboratory
measurement and multi-block numerical simulations of the mean flow
and turbulence in the non-aerated skimming flow region of steep stepped
spillways”, Environ Fluid Mechanics.
Castro M. (2015) “Análisis Dimensional y Modelación física en Hidráulica”.
Escuela Politécnica Nacional. Quito Ecuador. 50 p.
Chanson H., D. B. Bung., J. Matos (2015). “Stepped spillways and cascades”.
IAHR Monograph. School of Civil Engineering, University of
Queensland, Brisbane, Australia.
Chanson H. (1993). “Stepped Spillway Flows and Air Entrainment.” Can. Jl
of Civil Eng., Vol. 20, No. 3, June, pp. 422-435 (ISSN 0315-1468).
CIERHI, EPN TECH, (2016). “Estudio experimental en modelo físico de las
rápidas con perfil escalonado y liso de la quebrada el Batán Fase I y Fase
II”, Escuela Politécnica Nacional, Quito Ecuador.
Fernández Oro J. M. (2012)., “Técnicas Numéricas en Ingeniería de Fluidos:
Introducción a la Dinámica de Fluidos Computacional (CFD) por el
Método de Volúmenes Finitos”. Barcelona: Reverté.
Flow Science, Inc. (2012). “FLOW 3D 10.1.0 Documentation Release.
Manual de Usuario”, Los Alamos National Laboratory. Santa Fe, New
México
Khatsuria, R.M., (2005)., “Hydraulics of Spillways and Energy Dissipators”.
Department of Civil and Environmental Engineering Georgia Institute
of Technology Atlanta.
Lucio I., Matos J., Meireles I. (2015). “Stepped spillway flow over small
embankment dams: some computational experiments”. 15th FLOW-3D
European users conference.
Mohammad S., Jalal A. and Michael P., (2012). “Numerical Computation of
Inception Point Location for Steeply Sloping Stepped Spillways” 9th
International Congress on Civil Engineering. Isfahan University of
Technology (IUT), Isfahan, Iran
Pfister M., Chanson H., (2013), “Scale Effects in Modelling Two-phase Airwater Flows”, Proceedings of 2013 IAHR World Congress.
Sarfaraz, M. and Attari, J. (2011), “Numerical Simulation of Uniform Flow
Region over a Steeply Sloping Stepped Spillway”, 6th National
Congress on Civil Engineering, Semnan University, Semnan, Iran.
Valero, D., Bung, D., (2015), “Hybrid investigation of air transport processes
in moderately sloped stepped spillway flows”, E-proceedings of the 36th
IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands.

원문보기