Figure 4.6 A schematic of a die-cast die with shot sleeve and plunger: 1) Shot sleeve, 2) Plunger, 3) Stationary half of the die-cast die, 4) Ejector half of the die-cast die, 5) Mold cavity, 6) Ventilation channel.

Figure 4.6 A schematic of a die-cast die with shot sleeve and plunger: 1) Shot
sleeve, 2) Plunger, 3) Stationary half of the die-cast die, 4) Ejector half of the die-cast die,
5) Mold cavity, 6) Ventilation channel.